Cummins

Share

Share page with AddThis
  Print 

divtop

Diesel Pro®, Fuel Pro®, Industrial Pro® & SeaPro®

Our range of Pro Series fuel filters provide an excellent intermediate solution to improving fuel system cleanliness, as part of the overall goal of better fuel system performance.

Pro Series filters address a number of fuel system issues, including extending the service life of the element by using ‘Seeing is Believing®’ technology. Seeing is Believing shows when the filter has reached maximum holding capacity and easily indicates when the filter requires changing, eliminating element wastage that often occurs through premature filter changes.

With up to four times the contamination-holding capacity of standard fuel filters, Pro Series filters extend service intervals well beyond the original equipment filter capabilities. Pro Series filters also have high efficiency water removal capability of more than 95% for the service life of the element.

Pro Series filters can be supplied with a number of other options to control fuel system issues:

  • Water in fuel (WIF) indicators to warn you when it’s time to drain excess water collected by the filter
  • Heater options to help prevent filter plugging caused by paraffin wax solidification in colder weather
  • Priming pumps built-in for ease of service

Pro Series filters are factory fitted into many commercially manufactured vehicles or are easily adapted as a retrofit to improve or replace your existing fuel filtration system.

  • Diesel Pro for light commercial applications – flows up to 5.7 litres per minute (90GPH)
  • Fuel Pro for heavy duty applications – flows up to 11.4 litres per minute (180GPH)
  • Sea Pro for medium to high horsepower marine applications – flows up to 68 litres per minute (1080GPH) 
  • Industrial Pro for extreme duty high horsepower mining applications – flows up to 75.7 litres per minute (1200GPH)

All Pro Series filters are easily serviced for element changes, reducing labour costs and downtime.

Description
LITERATURE
VIDEOS
FAQS

How does Fleetguard fuel filtration save me money?

Fleetguard fuel products help you achieve the lowest total cost of ownership by meeting or exceeding OE performance requirements. Fleetguard fuel products provide the latest protection technology for your fuel system.
 

What is the most important factor to know about a fuel filter?

The efficiency to deliver fuel at the cleanliness level specified by the fuel injection system manufacturer (i.e. you need details such as 98.7% efficient at 5 microns).
 

How will I know I have a fuel issue before I experience fuel system damage/failure?

Indications of fuel problems will be: 1) premature filter plugging which could be evidence of microbial growth in the fuel 2) frequent need to drain water from fuel/water separators which could indicate issues with fuel storage or equipment fuel tanks 3) unusual fuel colour or odour which could indicate improper use of on or off-highway fuel or microbial growth or excessive heat and oxidation resulting in darker fuel colour.
 

For Remote Mount Processors, what does Fleetguard have available?

Fleetguard offers the following fuel processors: Diesel Pro for light commercial applications – flows up to 5.7 litres per minute (90GPH), Fuel Pro for heavy duty applications – flows up to 11.4 litres per minute (180GPH), Sea Pro for medium to high horsepower marine applications – flows up to 68 litres per minute (1080GPH) and Industrial Pro for extreme duty high horsepower mining applications – flows up to 75.7 litres per minute (1200GPH).
 

What is FIE?

Fuel Injection Equipment represents the entire fuel system including fuel supply plumbing, supply pumps, high pressure pumps, common rail hardware, injectors and return lines.
 

What is ISO 4406 and what does it measure?

It is the International Organisation for Standardisation measurement methodology for particle counts in fluids at particle sizes >4, >6 and >14 micron-C. The particle counts are typically specified in units of particles per 100 ml of fluid.
 

What is ISO 12/9/6?

The display of the terminology "ISO 12/9/6" is the proper means of communicating fluid particle contamination as per the ISO 4406 fluid cleanliness methodology. The ISO 12/9/6 is an example of the fuel cleanliness level specified by some FIE manufacturers and corresponds to particle counts per 100 ml of 4000 at >4 micron-C, 500 at >6 micron-C and 64 at >14 micron-C.
 

What is a micron?

A micron is a thousandth of a millimetre or a millionth of a metre or .000039 of an inch. Micron is the unit of measure used to determinate the size of particles in a fluid which are filtered out by the filter.
 

What is the difference between Absolute and Nominal micron rating?

Micron rating is the size of particles which are filtered out by filters at a certain efficiency. When this efficiency is at least 98.6%, we speak about absolute micron rating/filtration. Nominal micron rating is just a commercial trick for all efficiencies lower than 98.6%, meaning that for the same micron rating (for example 10 µ) in the case of nominal rating, not all particles will be captured in the filter as in the case of absolute micron rating.
 

Why doesn't Cummins Filtration publish micron ratings for all its filters?

Generally this is not necessary. Cummins Filtration filters are designed to meet or exceed OEM specifications.

Home